Magnavox 14MS2331/17, 20MS2331/17, 20MS2331/37R User Manual

Also see for 14MS2331 - 14" Real Flat Stereo Tv: User manual

Contents

Magnavox 14MS2331/17, 20MS2331/17, 20MS2331/37R User Manual Manual pdf 5 page image

If Cable TV signal into your home is asingle cable (75 ohm) the connectionto the TV is easy.1Connect the Cable TV cabledirectly to the 75Ω jack on theTV.Basic Cable TV ConnectionBasic Antenna Connection75Ω75ΩCable TV SignalRF CoaxialCable 75ΩRear of TVAcombination antenna receives normalbroadcast channels (VHF 2-13 andUHF 14-69). Your connection is easysince there is only one 75Ω (ohm)antenna plug on the back of your TV -and that’s where the antenna goes.1If your antenna has a roundcable (75 ohm) on the end, thenyou're ready to connect it to theTV. Go to step 2.If your antenna has flat twin-lead wire (300 ohm), you firstneed to attach the antenna wiresto the screws on a 300 to 75ohm adapter (not supplied withTV).2Push the round end of theadapter or antenna cable ontothe 75Ω jack on the rear of theTV. If the round end of theantenna cable is threaded, screwit down tight.175Ω75ΩCombinationVHF/UHF Antenna(Outdoor or Indoor)Twin LeadWireRound Cable 75ΩRear of TVIf no Video Signal is present, the TVwill shut itself off in about 10 min-utes. If the TV is tuned to the AVchannel and there is no Video Signalpresent, the screen will remain blackand the TV will shut itself off in about10 minutes.Use Auto Program as described onpanel 9 to set up channels that areavailable in your area. Use the CH +/–buttons to scan available channels.Helpful Hints