Magnavox 14MS2331/17, 20MS2331/17, 20MS2331/37R User Manual

Also see for 14MS2331 - 14" Real Flat Stereo Tv: User manual

Contents

Magnavox 14MS2331/17, 20MS2331/17, 20MS2331/37R User Manual Manual pdf 6 page image

Cable Box Connections2TOTV/VCRCABLEIN IRUSBDVD-D OUTAUDIO IN SPDIF VIDEOIN OUTS-VIDEOR LAUDIO OUTTVPASSCARDY Pb PrOPTICALSPDIF1275Ω 75Ω3Jack Panel Back of Cable BoxCable Signal INfrom the CableCompanyRound 75ΩCoaxial Cable Jack Panel Back of TVIf you cable signal uses a cable box ordecoder, follow the easy steps below tocomplete the connection.Cable Box (w/RF In/Outputs):This connection will be mono.1Connect the Cable Companysupplied cable to the signalIN(put) plug on the back of theCable Box.2Using a separate round coaxialcable, connect one end to theOUT(put) (TO TV) plug onthe back of the Cable Box.3Connect the other end of theround coaxial cable to the 75Ωinput on the back of the television.Screw it down finger tight.NOTE: If applicable, set the OUTPUTCHANNEL SWITCH on the back of thecable box to CH 3 or 4. Tune the TV tothe same channel and change channelsat the cable box. In some cases, thecable box will automatically tune toeither channel 3 or 4, change channelsuntil the picture appears.If no Video Signal is present, the TVwill shut itself off in about 10 minutes.If the TV is tuned to the AV channeland there is no Video Signal present,the screen will remain black and theTV will shut itself off in about 10 min-utes.Helpful Hints