7��C CSOURCE P I PM E N UO K����������� ��� ��������������� ����������������������������������������������������������ACCESSORY DEVICEEQUIPPED WITH COMPONENTVIDEO OUTPUTS.����������������������Component Video input provide the highest possible color andpicture resolution in the playback of digital signal source material,such as with DVD players. If you are using a HD (High Definition)receiver that can transmit high definition programming, the TV canaccept those signals through the Component input located on thebottom of the TV.Connect the component (Y, Pb, Pr) Video OUT jacks from theDVD player (or similar device) to the COMP(onent) VIDEO Inputjacks on the bottom of the LCD TV.Connect the red and white AUDIO CABLES to the Audio (leftad right) output jacks on the rear of the accessory device to theAUDIO IN jack. Connect the other end of the cable to the Audiojack on the rear of LCD TV.Plug the DC Adapter into the DC IN 16 V jack on the LCD TV.Plug the power cable into an outlet. Turn on the LCD TV and otherequipment.Press the SOURCE button on the remote control to select HD.HD will appear in the upper left corner on the TV screen.Insert a DVD disc into the DVD player and press the PLAY buttonon the DVD Player.12345The S-Video connection on the rear of the LCD TV can provide youwith better picture detail and clarity for the playback of accessorysources such as DBS (digital broadcast satellite), DVD (digital videodiscs), video games, and VHS VCR (video cassette recorder) tapesthan the normal antenna picture connections.Connect an S-Video cable to the S-VIDEO jack of the otherequipment (DVD Player, Camcorder, etc.) and to the S-VIDEO jackon the rear of the LCD TV.Connect RCA-style audio cables (usually red and white) to theAUDIO OUT (left and right) jacks on the other equipment.Connect the other end of the cables to the AUDIO jack on theside of the LCD TV.Plug the DC Adapter into the DC IN 16V jack on the LCD TV.Plug the power cable into an outlet. Turn on the LCD TV and otherequipment.Press the Source buttons to set the LCD TV to its S-VIDEO mode.Press PLAY on the other equipment to view its material on theLCD TV.12345Note:• The Magnavox LCD TV remote control can not be used to operate other video/audio equipment.• The Audio jack of AV IN is shared between Video (CVBS) and S-Video signals. If Audio and Videois connected to S-Video input, you can still hear sound if you select Video via Source select, eventhere appears no image on screen.S-V IDEO CONNECTIONSCOMPONENT (HD) CONNECTIONSC CSOURCE P I PM E N UOKANT E NNAOUTANT E NNAINV IDE OAUDIOININOUTOUTLRS -V HS OUT3 512Jack PanelSide of TelevisionS- VideoCableAudio CableVCR or ExternalAccessory Device(with S-VideoOutput)4VIDEO3wPo er CableS - VIDEOAUDIONote:• The Magnavox LCD TV remote control can not be used to operateother video/audio equipment.