Magnavox 17MD255V Manual

Also see for 17MD255V: Specifications

Connectionspage82a2e1a 1bComputeror HDTV Receiver2b2c2fPHONESAUDIOAUDIOS-VIDEOVIDEO LRCB / P BYDC INVGAAV1 INAUDIOLRCR / P RAUDIOVIDEO LRAV OUTAV2 IN2dVGA Audio Cable1. CONNECT TO POWERa. Connect the mini plug of the AC poweradapter to DC IN jack on the back of the17MD255V.b. Connect the power plug of the AC poweradapter to the power socket.2. SYSTEM CONNECTIONSa. Using the antenna input: Connect theantenna terminal from an antenna orcable/satellite receiver to the antenna inputterminal on the 17MD255V; use theTV/DVD/AUX/PC button and the /buttons to set the 17MD255V’s signal sourceto "TV".b. Using the AV1 RCA Video/Audio input:Connect compatible AV equipment to the17MD255V through the AV1 IN jacks on17MD255V (Composite Video and Audioinput jacks); use the TV/DVD/AUX/PCbutton and the / buttons to set the17MD255V’s signal source to "AV1-Video".c. Using the AV1 S-Video and RCA Audioinput: Connect AV equipment to the17MD255V through the AV1 IN jacks on17MD255V (S-Video and Audio input jacks);use the TV/DVD/AUX/PC button and the/ buttons to set the 17MD255V s signalsource to AV1-S-Video .d. Using the AV2 Component input: The AV2input may be used for Progressive scan orHDTV inputs; use the TV/DVD/AUX/PCbutton and the / buttons to set the17MD255V’s signal source to "AV2-Component".e. Using the VGA connector: Connect a PCcomputer to the 17MD255V through theVGA socket on 17MD255V. The Mini-plugged next to the VGA input is for audioassociated with this type of signal. Use theTV/DVD/AUX/PC button and the /buttons to set the 17MD255V s signal sourceto PC-IN . 17MD255V monitor s nativeresolution for computer use is 1024x768.f. Using the AV out, RCA Video/Audiooutput: Connect the 17MD255V to anotherTV Monitor through the AV OUT jacks on17MD255V(Composite Video and Audiooutput jacks); now you can use the TVMonitor as an external monitor. Signals fromthe Antenna, AV1 and Internal DVD playerwill be available at this point.