BLOCK / CLEAR ALL CHANNELS AT THE SAME TIMEAAfter blocking specific channels there may come a time when you want to block or clear all the channels at thesame time. This can be done only after you have entered your access code and the AutoLock features aredisplayed on the screen (refer to page 22).1 Press CURSOR > to selectBlock channel. Press theCURSOR > button toenter the Block Channelmenu.2 Press CURSOR < or >until All Channelsis highlighted. PressCURSOR > or < totoggle between Block andBlock andBlockUnblock. If Unblock isselected, all channels willbe viewable. If Block isselected, ALL availablechannels will be blockedfrom viewing.3 When finished, pressMENU on the remotecontrol four times to exit.1 Press CURSOR > toselect either Clear All orBlock All.2 If Clear All is set to on, allchannels will be viewable.If Block All is set to onall available channels will beblocked from viewing.3 When finished, press MENUon the remote control fourtimes to exit the menu fromthe TV screen.Follow these steps for Digital Mode Follow these steps for Analog modeAutoLockBlock ChannelBlock Channel2 - 1 WCBS - DT35 - 1 MELCO59 - 1All Channels Unblock OffBlock AllOnClear All>> < >MENUMENUDigital Mode Analog ModeBLOCK OPTIONS1 Press CURSOR < or > until you see BlockOptions highlighted.2 Press CURSOR < or > to display the BlockOptions (Unrated, No Rating or Blocking) menu.3 Press CURSOR < or > until you see thedesired Option is highlighted. When highlighted,each feature can be turned On or Off usingOff usingOffCURSOR > or < on the remote control.4 When finished, press MENU four times to exitthe menu.Block Options allows you to block programs by ratings instead of channels. This can be done only after you haveentered your access code and AutoLock feature is displayed on the screen (refer to page 22).Follow these steps for both Digital and Analog ModeUnratedNo ratingBlockingUnratedNo ratingBlockingMovie RatingTV RatingBlock OptionsAutoLock>> < >MENUDigital Mode23Analog Mode