26ENO PTIONAL SETTING55 Sound5AdjustmentYou can adjust the smart sound, equalizer and some other sound functions.Before you begin: You must set ”Home” in ”Location”. Refer to page 35.Otherwise, the settings you adjusted will not bememorized after the unit goes into standby mode.1 Press [MENU] to display the main menu.2 Use [Cursor K / L] to select “SOUND”, then press [OK].SOUNDSETUPFEATURESLANGUAGEDVDEqualizerAuto Volume LevelingTV SpeakersOffExt. AmpStandardSmar t SoundPICTURE3 Use [Cursor K / L] to select the sound type you want toadjust, then press [OK].SOUNDSETUPFEATURESLANGUAGEDVDEqualizerAuto Volume LevelingTV SpeakersOffExt. AmpStandardPICTURE Smar t Sound4 Adjust the following items.Smart SoundUse [Cursor K / L] to select the desired setting, thenpress [OK].(“Personal “, “Standard “, “Movie “, “Music “and “News “)SOUNDSETUPFEATURESLANGUAGEDVDEqualizerAuto Volume LevelingTV SpeakersMovieMusicNewsSmar t SoundPICTURE PersonalSmar t SoundStandardEqualizerAdjust tonal quality for each frequencies.Use [Cursor s / B<>] to select the specific frequency anduse [Cursor K / L] to adjust the level, then press [OK].SOUNDSETUPFEATURESLANGUAGEDVDPICTURE 0120Hz0500Hz01.5kHz05kHz010kHzAuto Volume LevelingThis function keeps a constant loudness differentialbetween the TV commercials and the programs.Use [Cursor K / L] to select the desired option, thenpress [OK].Auto Volume Leveling reduces volumedifferences betweenchannels and programs, providinga consistent audio level.OnOffPICTURESOUNDSETUPFEATURESLANGUAGEDVDOnSelect if you want to reduce volumedifferences between the TV commercialsand the programs.Off Select if you want to remove the autovolume leveling.TV SpeakersSelect the audio output from the unit’s speakers, or not.If your amplifier compatible with the CEC function isconnected to this unit using an HDMI cable, some partof the sound operations such as volume up can accesssynchronized by using this unit’s remote control.Use [Cursor K / L] to select the desired option, thenpress [OK].SOUNDSETUPFEATURESLANGUAGEDVDOffPICTURE"On":Sound will be output from the TV speakers."Off":Sound will not be output from the TVspeakers."Ext. Amp":Operation is possible by connecting to theHDMI-CEC compatible amp with a HDMIcable. For details look in the user manual.OnExt. AmpOn The sound will be output from the unit’sspeakers.Off The sound will not be output from theunit’s speakers.Ext. AmpThis function allows you to control audiooutput from CEC-compatible deviceswith the unit’s remote control.5 Press [MENU] to exit.Note:• To cancel sound adjustment, press [MENU].• We do not guarantee 100% interoperability with otherbrands of CEC compliant devices.