9 INTRODUCTION PREPARATION WATCHING TV USING FUNCTIONS USEFUL TIPSCONNECTING DEVICES INFORMATIONEnglishControl Panel761823451 VOLUME + / − ➠ p.13Press to adjust the volume up /down or move right(+) / left (−) through the main menu items.2 CHANNEL + / − ➠ p.12Press to select channels or move up (+) / down (−)through the main menu items.3 MENU ➠ p.154 SOURCE ➠ p.125 POWER ➠ p.11Press to turn the unit on and go into standby mode.To completely turn off the unit, you must unplug the ACpower cord.6 Infrared sensor windowReceives infrared rays transmitted from the remotecontrol.7 Power on indicatorLights up green when power is on.8 Stand by indicatorLights up red when the unit goes to standby mode.Terminals91019151617181314201211Side Panel9 S-Video / Composite Video /Audio (L/R) Input jacksfor VIDEO ➠ p.2610 HDMI 2 Input jack ➠ p.10, 2511 USB terminal ➠ p.27Use this terminal only to play back the picture (JPEG) andvideo (Motion JPEG) files stored on a USB storage device,or when software update is needed.Rear Panel12 AC power cord Inlet ➠ p.1013 Cable management ➠ p.2714 Component Video and Audio (L/R) Input jacks➠ p.10, 2615 Analog Audio (L/R) Output jacks➠ p.2716 Analog Audio (L/R) Input jacks for HDMI 1Input jack ➠ p.25, 27Audio cable connection from a DVI device.When you connect your PC that has a DVI terminal,use a stereo mini plug conversion cable as well.(For HDMI 1 Input jack only)17 Digital Audio Output jack ➠ p.2718 Antenna Input jack ➠ p.1019 HDMI 1 (HDMI-DVI) Input jack ➠ p.10, 25, 27HDMI connection for HDMI or DVI device.When you connect your PC that has a DVI terminal,you can enjoy this unit as a PC monitor.20 HDMI 3 Input jack ➠ p.10, 25Note for USB terminal• User should not connect any devices to the USB terminal such asdigital camera, keyboard, mouse, etc. (because these will not work).• The software update is, in most cases, handled by an authorizedservice person or in some circumstances the user may be askedto do the software update themselves.