Magnavox 40MV336X Owner's Manual

Also see for 40MV336X: Owner's manual

Contents

Magnavox 40MV336X Owner's Manual Manual pdf 43 page image

Update softwareMAGNAVOX continuously tries to improve its products and we stronglyrecommend that you upgrade the TV software when upgrades areavailable.New software can be downloaded from our website atwww.magnavox.com/support/download using the model number of yourTV to find information.You can update the software through these methods:● update with USB Memory Stick● update from digital broadcast Software auto-update L p. 44This section describes how to upgrade the software by using USB MemoryStick.Preparing for the Software upgradeYou require the following equipment:– A PC with web browsing capability– An archive utility that supports the ZIP-format(e.g. WinZip for Windows or StuffIt for Mac OS)– An empty clean formatted USB Memory StickNote(s)● Only FAT / DOS-formatted portable memory is supported.● Use only software upgrades that can be found on the MAGNAVOX web site.Warning● When the software upgrade is running, don’t press any buttons.● Do not remove the USB Memory Stick during the software upgrade.● If an error occurs during the upgrade, retry the procedure or for further assistance, pleasecontact Call Center.Downloading the SoftwareFind information and software related to your TV and download the latestsoftware upgrade file to your PC.Prepare a blank USB memory stick for Software Update. Accesswww.magnavox.com/support/download and download the latest versionsoftware to a blank USB memory stick using a PC by following theDirections described on the website.● Use a blank USB memory stick, download the software on your PC andwrite the software in the root directory of the USB memory stick.● For more details on how to download the software, please refer to thewebsite.USB upgradeYou can upgrade the software by using USB Memory Stick.1 Connect your USB Memory Stick with the upgrade file to the USBterminal on the side of your TV.2 Press Z and use J K to Select Setup then press OK.3 Use H I J K to Select Update software, then press OK.4 Use H I to Select USB, then press OK.5 Use H I J K to Select the desired update file, then press OK.6 Use J K to Select Yes, then press OK.● Read the on-screen instructions and confirm that you want tocontinue with the installation.Do not remove the USB storage device or turn the TV off whileupgrade is in progress.Software update is in progress. Please wait.7 When the software upgrade is completed, press B to set the unitinto Standby mode, then remove the USB Memory Stick.8 Unplug the AC power cord for a few seconds from AC outlet andplug it again.9 Press B again to Turn the unit On.● The TV starts up with the new software.● For further assistance, please contact Call Center.43 .EnglishContinued on next page.