16ENPREPARATIONSupplied accessories used in this connection are as follows:• cable management tie x 1• AC power cord x 1[USB Flash Memory]This unit offers easy playback JPEG pictures and MP3musics.Insert the USB flash memory to the USB terminal shownas below. For more details, refer to “JPEG/MP3 Playback”on page 36.Note:• The USB flash memory is not supplied with this unit.• Do not use an extension cord between the USB flashmemory and the unit. Always insert the USB flash memoryto this unit directly.• We do not guarantee the all USB flash memory can besupported on this unit.• Be sure to keep a backup copy of the original files on yourdevice before you play them back on this unit.We have no responsibilities for damage or loss of yourstored data.• When you ready to remove a USB flash memory, at first turnoff the unit to avoid any damage for your data and the unit.• If the USB flash memory left behind in the USB terminal andyou turn off the unit, the “USB”(main menu) will appearautomatically when you turn on the unit again.5 Cable ManagementAttach the supplied cable management tie first into theholes on the lower side of the rear of this unit shownas below. Keep the cables through this holder to avoidtangle them.rear of this unitside of this unit5 Plug In the AC Power CordMake sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.Caution:• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.Note:• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.rear of this unitAC power cordAC outlet
