51ENINTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING BLU-RAY BLU-RAY SETTING TROUBLESHOOTING INFORMATION5 Blu-ray Audio SettingChoose the appropriate audio settings for your equipment. It only affectsduring the playback of BD/DVD.3 Follow steps 1-2 on page 49, then use [Cursor K / L] toselect “ ”, then press [OK].orCustomLanguageVideoAudioParentalOthers4 Use [Cursor K / L] to select “ ”, then press [OK].orAudioBD Audio Mode Mix Audio OutputDigital Out BitstreamDown Sampling OnDRC Auto5 Use [Cursor K / L] to select the desired item, then press[OK].BD Audio Mode (Default: Mix Audio Output)You can select whether to output the primary andsecondary audio or only the primary audio.AudioBD Audio Mode Mix Audio OutputDigital Out BitstreamDown Sampling OnDRC AutoMix AudioOutputAt the same time, 7 outputs the primary andsecondary audio if it is available.HD AudioOutput Outputs only the primary audio.Digital Out (Default: Bitstream)Set to “Bitstream“ when this unit is connected to aDolby Digital decoder and DTS decoder.AudioBD Audio Mode Mix Audio OutputDigital Out BitstreamDown Sampling OnDRC AutoBitstreamWhen playing back discs recorded in DolbyDigital, Dolby Digital Plus, Dolby TrueHD, DTSor DTS-HD, the corresponding core stream(Dolby Digital or DTS) are output.LPCM 2ch LPCM signal will be output from DigitalAudio Out jack.Down Sampling (Default: On)This function is available only on digital outputting of adisc recorded in 96kHz.AudioBD Audio Mode Mix Audio OutputDigital Out BitstreamDown Sampling OnDRC AutoOn When outputting in 48kHz.Off When outputting the original sound.Note:• When playing back a 96 kHz disc with the copyrightprotection or when ‘‘Virtual Surround” is set to “1” or “2”,the sound will be down sampled at 48 kHz even if the“Down Sampling” is set to “Off”.(Refer to “Virtual Surround” on page 48.)DRC (dynamic range control) (Default: On)This function is available only on the discs which arerecorded in the Dolby Digital format.orAudioBD Audio Mode Mix Audio OutputDigital Out BitstreamDown Sampling OnDRC AutoAutoWhen the discs that are recorded in the DolbyTrueHD format is in playback, this unit detectsDRC setting of the disc and set the DRC settingof this unit to “On” or “Off” automatically.On Compress the range between soft and loudsounds.Off No effects (original sound).6 Press [MENU / EXIT] to exit.
