Magnavox 42MF237S User Manual

Also see for 42MF237S - 42" Digital Plasma Hdtv: Quick start guide Brochure Guía del usuario Manuel de l'utilisateur

20EnglishFrançaiseEspañolTV menuInfoInstallation Reset AV settingsLanguagePreferencesReset AV settingsClockSoftware upgradeResetChannelsConnectionsReset AV settingsThis function allows you to reset most of the picture and sound settings totheir predefined factory states.& Select Reset AV settings with the cursor down.é Press the cursor right.“ Press the OK button to erase settings and reset them to their defaultvalues.Software upgradeThis menu allows you to upgrade your TV software by using a USBdevice.USB upgradeIt is possible to initiate an upgrade procedure from a USB portablememory. The memory device must be filled with the appropriateupgrade image (and structure) which can be found on the www.magnavox.com/usasupport website.Connect Accessory DevicesUsing HDMI& Connect the RF cable from the wall to the back of the cable box.Set the set-top box to CH 3 or 4 and tune the TV to the same channel.In some cases, the cable box will automatically tune to channel 3 or 4. Justchange channels until the picture appears.é Connect the cable box to the TV by using the HDMI cable.Note : If the accessory device has DVI output only, use a DVI to HDMI adaptercable to connect to the HDMI connector. You need to also connect the audiocable to L and R AUDIO jacks. Next, go to Menu => TV menu =>Installation => Connections => Audio in L/R => AV1.Using RF Cable& Connect the RF cable from the wall to the back of the cable box.é Use a second RF cable to connect the cable box to the TV's antennainput.This connection gives mono sound. For stereo sound use also composite audio/video connection (Refer to panel 3).1a Set Top Box to TV1b Set-Top Box to TV Using Component Video Input& Connect the Component Video and Audio cable to the back of the cablebox accordingly.é Connect the red and white audio cables from the cable box into theaudio AV inputs of the TV.“ Press the AV button on the remote control until the connected sourceAV 1 appears on the TV screen.HDMI 2AUDIO OUT(DIGITAL)CABLE / ANTENNAHDMI 1212AUDIO OUT(DIGITAL)CABLE / ANTENNAHDMI 1HDMI 21 23AV ButtonNext SourceAV 2TVAV 1HDMI 2SideHDMI 1Next SourceAV 2TVAV 1HDMI 2SideHDMI 1