26EnglishFrançaiseEspañolExamples of stationary images (this is not an all-inclusive list, you may encounter others in your viewing):• TV and DVD menus: listings of DVD disk content;• Black bars: when black bars appear at the left and right side of the screen, it is recommended to change to a picture format so thatthe picture fills the entire screen;• TV channel logo: present a problem if they are bright and stationary. Moving or low-contrast graphics are less likely to cause unevenaging of the screen;• Stock market stickers: presented at the bottom of the TV screen;• Shopping channel logos and pricing displays: bright and shown constantly or repeatedly in the same location on the TV screen.Examples of still pictures also include logos, computer images, time display, teletext and images displayed in 4:3 mode, static images orcharacters, etc.Notes:- reduce contrast and brightness when viewing- once burn-in occurs it will never disappear completely.If your problem is not solvedTurn your TV off and then on again once.Never attempt to repair a defective TV yourself.Check with your dealer or call a TV technician.Telephone number Magnavox CustomerCare Center: 1-800-705-2000Please, have the Model and Product number which you can find atthe back of your television set ready, before calling.Care of the screenDo not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rubthe screen with chemically treated cloths.Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning thescreen.When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks.Do not use acetone, toluene and alcohol because they cause chemical damage. Do not use liquid cleaners or aerosol cleaners. Wipe off salivaor water drops as soon as possible. Their long time contact with the screen causes deformations and color fading.Plasma display characteristicsThis Plasma display is designed to be used at altitudes up to 6562 ft above sea level (and/or local air pressure equal or above800 hPa). Operating this set at higher altitude (lower air pressure) is possible. However, at high altitudes (or local air pressure equal orbelow 800 hPa) the picture on this display may become unstable and picture performance can deteriorate. In addition, the plasma display mayproduce a humming sound in these conditions.These possible adverse effects relate to the altitude and are common of all plasma displays. Once the set is brought below aprox 6562 ft(and/or local air pressure equal or above 800 hPa) its function will most likely return to normal.Note: Transportation at high altitudes has no negative effect on the set or picture performance.How to dispose of batteries?The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many areas batteries may not be disposed ofwith your household waste. Please ensure you dispose of batteries according to local regulations.Tips