Magnavox 47MF438B User Manual

Also see for 42MF438B - 42" LCD TV: Specifications User manual Brochure Quick start User manual

Contents

Magnavox 47MF438B User Manual Manual pdf 24 page image

6. Change yourTV installationThe first time you switch on your TV you select the language for the TVmenus and make basic choices for picture and sound settings. Use thischapter to reinstall the TV, to set preferences in the TV menus, or totune new TV channels.6.1 Select your menu language1. Press MENU on the remote control and select Installation >Language.Installation Language3.If you have forgotten your PIN, reset it as described in Set or changeyour PIN on page 17.Select Cable or Antenna and press OK.• When Antenna is selected, the TV detects antenna signals. Itsearches for NTSC and ATSC channels available in your area.• When Cable is selected, the TV detects signals supplied by cable.It searches for NTSC,ATSC, and QAM modulated channelsavailable in your area._VO_ TV installation2. Select a language and press OK to confirm your choice.3. Press _1to return to the Installation menu.6.2 Set your location to homeYou can set the location of your TV to Home or Retail store.Choosing Home gives you full flexibility to change predeflned settingsfor picture and sound.1. Press MENU on the remote control and select Installation >Preferences > Location.2. Select Home and press OK to confirm your choice.3. Press _1 to return to the Installation menu.6.3 Tune channels automaticallyThis section describes how to search for and store channelsautomatically. Before you tune channels, ensure that you are registeredwith your cable TV provider and that your equipment is correctlyconnected.1. Press MENU on the remote control and select Installation >Channels > Autoprogram > Start Now.= TV...... IInstallation MAGNAVOXChannels AutoprogramAutoprogramWhen autoprogramming is complete, this message appears"Channel search completed".4. Follow the on-screen instructions to complete the installation.6.4 Optimize the signal quality from your antennaYou can optimize your signal quality by tuning in ATSC channels withweak signals, and adjusting the antenna.1. Press MENU on the remote control and select Installation >Channels > Installation mode.2. Select Antenna and press _1 to confirm your choice.3. Press A and _ to enter Weal{ channel installation.4. Highlight a channel from the list of TV channels and press the greencolor button on the remote control.The signal strength for the channel is displayed.5. Adjust your antenna to maximize the signal strength.6. Press MENU to exit.Press OK to start the installation.If you run Autoprogram when you have locked channels, amessage appears asking to enter your PIN code. Enter your PINcode in order to complete the installation.EN-23