Replacing the Internal Lamp31EnglishRe p l ac i n g th e I n te rn a l L a mpTo order a replacement lamp, call the Magnavox Customer Care Center at 1-800-705-2000. A Magnavoxassociate will be happy to assist you.The part number for the Magnavox replacement lamp is SP.L6502G001Warning!• Turn off the unit and unplug it before replacing the lamp• Take care that no screws or other foreign metal objects fall into the display interior. Such itemscould cause fire or electrical shock.• Do not remove the lamp except to replace it. Careless handling can cause injury or fire.• Do not replace the lamp immediately after the display is turned off. The high temperature of thelamp could cause serious burns. Allow the lamp to cool down at least two hours after turningoff the display1. Remove the front decorative cover. 2. Unscrew and remove the protective cover fromthe lamp module.3. Loosen the three screws on the lamp unit andpull the lamp module out.Note: These screws can be loosened but cannot beremoved from the unit.4. Replace a new lamp module then screw back thethree screws on the lamp unit.5. Replace the protective cover and tighten thescrews.6. Replace the front decorative cover.