Troubleshooting32Tro u bl e s ho o ti ngProblem Item to checkNo power • Check that the power cord is properly connected.• Make sure the wall power outlet is working.• Make sure the remote has batteries.• If the remote control and control panel do not work, ensure that thepower switch on the rear of the TV is set to ON.Remote control not working • Replace the batteries• Check that the batteries are inserted correctly• Check that the remote control is close enough to the display• Adjust the angle between the remote control and the display.Picture is fuzzy • Check that the device generating the picture signal is operating prop-erly.• Check that you have set the display to receive the proper signal source.No sound • Check to see if the Mute function is activated.• Check the volume level.• Check that the device generating the audio signal is properly connectedto the display.Picture is unstable • Check that your video card is set within the allowable range.Screen is blank • Contact the dealer where you purchased the display.A buzzing sound comes fromthe speakers during display.• Check that the socket of the grounded hole is good.No image. • Check that the signal source is connected to the correct terminal.Temperature LED is red • Turn off the TV set and allow it to cool down. If the LED still persists,contact the nearest service center.Poor picture quality • Try switching to another channel and see if the problem persists.• Adjust the antenna.• Check all cable connections.Picture rolls vertically • Adjust the antenna.• Check all cable connections.• If you are using a VCR, check the tracking.Lamp indicator LED red • Lamp failed. Contact your nearest service center.There is a switch on the TV • Default is on.Other • Contact the dealer, authorized service personnel, or the Magnavox helpnumber provided here: 1-800-705-2000