Magnavox 52MF437S User Manual

Also see for 52MF437S - 52" Digital Lcd Hdtv: Specifications

Contents

ENGLISHPerfect Pixel HDPerfect Pixel HD is the most ideal setting as it fully processes the imageto make every single pixel the best it can be, improving contrasts,sharpness, picture depth, color reproduction and brilliance from everysource, including High Definition.Select On or Off to activate/de-activate Perfect Pixel HD.Dynamic contrastAutomatically makes the contrast in the darker and the brighter pictureareas more noticeable as the image on the screen changes.Normally select Medium. It may be preferred to select Minimum,Maximum or Off.Noise reductionNoise reduction automatically filters out and reduces the image noise.This improves picture quality when receiving weak signals.Select Off, Minimum, Medium or Maximum according to theimage noise in the picture.MPEG artifact reductionMPEG artifact reduction On smoothens the transitions on digitalcontent.Select On or Off.Color enhancementAutomatically controls green enhancement and blue stretch. It makes thecolors more vivid.Select Off, Minimum, Medium or Maximum.Active controlThe TV continuously measures and corrects all incoming signals in orderto provide the best picture possible.Select On or Off to activate/de-activate Active control.Light sensorLight sensor On automatically adjusts the picture settings for bestviewing dependent on the lighting conditions in the room.Select On or Off.Picture formatSee chapter 3.1 Widescreen picture format above._________________________5.2.3 Adjust sound menu settingsThe sound menu contains the settings that affect the quality of the sound.1. Press the MENU button on the remote control.> The main menu appears.2. Select TV menu and press the cursor right.> The TV Menu is moved to the left.3. Select TV settings and press the cursor right.> The TV settings menu is moved to the left panel.4. Select Sound and press the cursor right.> The Sound menu is moved to the left panel.5. Use the cursor up/down to select the Sound menu items.6. Press the cursor right to enter the selected Sound menu item.Dependent on the input signal, one or more menu items may not beselectable.7. Use the cursor buttons to adjust the settings.8. Press the cursor left to return to the Sound menu.•••••••EqualizerAllows you to select one of the predefined settings for the equalizer:Standard, Speech, Multimedia or Music.Use the color buttons to select.Use the cursor buttons to adjust the frequency response of the sound tomatch your personal taste.VolumeAllows you to adjust the sound output level.BalanceAllows you to adjust the output of the right and left speakers to obtainthe best stereo reproduction for your listening position.Audio languageAllows you to select an audio language out of the list of the availablebroadcasted languages.If there is more than one variant for an audio language, then selectone of the variants. To permanently change the audio language, use theLanguage menu in the Installation menu, see Chapter 7.2 Select yourlanguage.Alternate audio (only selectable with analog broadcast signals)Gives you the possibility to swap between the Main and Second audioProgram (SAP) when it is available.Mono/StereoAllows you to select, per TV channel, Mono or Stereo sound whenanalog stereo broadcasts are available.11TV menu/TV settingsSoundInfoEqualizerEqualizerVolumeBalanceAudio languageAlternate audioMono/Stereo..... 1,5kHz 5kHz3InfoTV menuTV settings SoundEqualizerVolumeBalanceAudio languageAlternate audioMono/StereoSound modeHeadphone volumeAuto volume levelingDelta volumeAuto surroundSettings assistantReset to standardPictureSound