Magnavox 52MF437S User Manual

Also see for 52MF437S - 52" Digital Lcd Hdtv: Specifications

Contents

ENGLISH- Emergency Alert Signalling is not possible:- with multimedia browser;- with analog video sources.- You always have the possibility to remove the message from thescreen.- The message display will overlap whatever menu element or othermessage is on the screen._________________________7.4.4 Downloaded rating tableThis allows you to add region ratings lock options next to your currentones.! Before activating, please ensure regional ratings are broadcasted._________________________7.5 Select your connectionsThis allows you to identify the type of accessory device you haveconnected to each particular input and output.1. Select Connections.2. Press the cursor right to enter the list of types of external inputs.3. Select the appropriate input with the cursor up/down.> When you select AV1, AV2, AV3, HDMI 1, HDMI 2, HDMI 3,Side, AUDIO IN L/R or DIGITAL AUDIO IN a list appearsallowing you to identify which type of accessory device isattached to this input.4. Press the cursor right again to enter the list of types of devicesconnected to the selected input.5. Select the accessory device with the cursor up/down.Digital Audio InIf an accessory device has a digital audio output, you can connect thiswith a single cable to the TV’s DIGITAL AUDIO IN jack.In the Connections menu, assign the DIGITAL AUDIO IN to thecorresponding external input to which your accessory device isconnected.In addition to accepting audio input via Digital Audio In, the TV canoutput encoded Dolby Digital audio via the DIGITAL AUDIO OUTconnector to an external amplifier or receiver.If your amplifier or receiver has a matching connector for Digital AudioIn, you can connect it with a single cable to the TV’s digital audio out.See Chapter 10.2 To make Video and Audio connections, Hometheater amplifier._________________________7.6 Set your clockThis allows you to set the time and day.Adjusting the clock is necessary for the correct working of Lockafter (See Chapter 6 Adjust feature menu settings) features._________________________7.6.1 Auto clock mode1. Select Clock in the Installation menu.2. Press the cursor right to select the Auto clock mode.3. Press the cursor right to instruct the TV to get the timeautomatically or manually.Most of the TV channels are not transmitting clock information.There are few cable channels but they are at the end of the channel ring.There is no clock transmission in antenna channels. In such cases eitherclock extraction is taking a long time or there is no clock._________________________7.6.2 Auto clock channel (only available when Auto clock mode is setto Automatic)With the cursor buttons, select the channel number on which timecan be found by the TV. Typically time can be found on PBS (PublicBroadcasting System) as well as some other channels._________________________7.6.3 Time - Day (only available when Auto clock mode is set toManual)With the cursor buttons, select and enter the correct time and day.If Auto clock mode Manual has been selected, and no clock searchhas been done, the system will keep the entered time and day._________________________7.6.4 Time zone (only available when Auto clock mode is set toAutomatic)This function allows you to select your local time zone. Broadcasted timeinformation will correct the clock display for your local time.1. Select Time zone with the cursor down.2. Press the cursor right to select your local time zone._________________________19InfoTV menu / InstallationPreferences Downloaded rating tableOffOnLocationVolume barShow emergency alertsDownloaded rating tableInfoMenu TVInstallation ConnectionsAV1AV2AV3HDMI 1HDMI 2HDMI 3SideAUDIO IN L/RDIGITAL AUDIO INLanguageChannel installationPreferencesConnectionsClockReset AV settingsInfoTV menuInstallation ClockAuto clock modeAuto clock channelTimeDayTime zoneDaylight savingLanguageChannel installationPreferencesConnectionsClockReset AV settings