[]Auto Channel ScanIf youswitchwires(e.g.,betweenantennaandCATV)or if youmovetheunitto a differentareaafter theinitial setting,or if yonrecovertheDTVchannelyoudeleted,youwill needtoperformautochannelscan.Beforeyoubegin:Makesureif theunitisconnectedtoantennaorcable.1 Press [SET-UP] to display the main menu.SET-UP23Use [Cursor AIr] to select"CHANNEL SETUP",then press [ENTER].e.g.) digital TV mode- TV SETUP -CHANNEL SETUPV-CHIP SETUPL_NGUAGE [ENGLISH]CAPTION [OFF]DTV SETUPUse [Cursor AIr] to select your desired presettype, then press [ENTER].e.g.) digital TV mode- CNANNELSETUP -ADD/DELETE (DTV)_- AUTO PRESET CH (DW)AUTO PRESET OH (TV/DTV)AUTO PRESET CH (CAW)! OATV takes approx. 50min.• When aerial antenna is connected, select"AUTOPRESETCH (TV)","AUTO PRESETCH (DTV)" or"AUTOPRESETCH (TV/DTV)".• When connected to CATV,select"AUTO PRESETCH(CATV)".• Auto scanning begins.e.g.) digital TV modeD25AUTOPRESET CH(DTV)II• When the scanning and memorizing are completed,the lowest memorized channel will be displayed.• When you selected "AUTO PRESET CH (TV/DTV)", thelowest memorized analog channel will be displayedwhen the scanning and memorizing are completed.If there is no analog channel, the lowest memorizeddigital channel will be displayed.Note:•If you connect the cable system directly, contact the CATVinstaller.•If you press [STANDBY-ON O] or [SET-UP]during "AUTOPRESETCH';the setting will be canceled.• When no channel can be received by "AUTOPRESETCH';"NO TVSIGNALS"is displayed on the TVscreen.• Channel setting will be saved even if the power fails.•If you have Spanish or French menus and need English,press [SET-UP]. Use[Cursor A/V] to select "IDIOMA" or"LANGAGE'[Press[ENTER] to select "ENGLISH"Press[SET-UP] to remove the main menu.• With regard only to the digital channel, even after the scan-ning is complete if you unplug the ACpower cord beforeturning off the unit by pressing [STANDBY-ONO ], thechannel setting may be lost.[] Language SelectionYoucanchooseEnglish,Spanish,orFrenchasyour on-screenlanguage.1 Press [SET-UP] to display the main menu.SET-UP2 Use [Cursor AIr] to select"LANGUAGE",then press [ENTER] repeatedly to change the setting.e.g.) digital TV mode- TV SETUP -CHANNEL SETUPV-CHIP SETUPLANGUAGE [ENGLISH]CAPTION [OFF]DTMSETUPNGLISH][ISPANOL]RAN_AIS]3 Press [SET-UP] to exit.SET-UPEN