Magnavox CD130MW9 Owner's Manual

Also see for CD130MW9: Owner's manual Owner's manual

Magnavox CD130MW9 Owner's Manual Manual pdf 27 page image

Note:• Repeatsetting (except "ALL") will be cleared when moving toanother tide, chapter or track.• During programmed playback for audio CD, repeat settingwill be effective for the tracks in the program.• Repeat playback or repeat A-B playback may not availablewith some discs.• RepeatA-B playback does not function during other repeatmode.• To cancel point A, press [CLEAR] at step 2 in "Repeat A-BPlayback'_• Stopping playback will cancel repeat A-B playback.[] Random PlaybackThisfunctionshuffles the playingorderof tracksinsteadof playbackin thesequence.In stop mode, press [MODE] repeatedly until"RANDOM" menu appears.MODE2 Press [PLAY I_] to start random playback.Note: I• To repeat the current track in the random mode, follow thesteps I and 2 in "Repeat Playback" on page 26 and select"DTRACK" I• To repeat the entire random selections, follow the steps I and2 in "Repeat Playback" on page 26 and select "_ ALL"• Random playback will be kept until you press [STOP II].[] Programmed PlaybackYou may determine the order in which tracks will be played back.In stop mode, press [MODE] repeatedly until the"PROGRAM" menu appears.MODEUse [Cursor • / V] to select a desired track, then press[ENTER] to store.• Additional tracks may be on other screens. Use[Cursor •1 V] to go on to the next / previous pages.• Repeat this step until you have selected all the tracksyou wish to play back in the program.• Up to 99 tracks can be ordered.• If 8 or more tracks were in a program, use[PREV I_1_1 / NEXT IHH] to see all the tracks.3 Press[PLAY I_] to start programmed playback.Note:• Press [CLEAR] to erase the last track in theprogram if youmake an error.• To erase all programmed tracks at once, select "ALL CLEAR"and press [ENTER] at step 2.• While a program is being played back, [STOP II] works asfollows:- Pressing [STOP II] once: The track will be in the resumestandby mode. Next time you press [PLAY I_ ], the playbackwill resume from the point where it is stopped in theprogrammed playback.- Pressing [STOP II] twice: Resume mode will be canceled.Next time you press [PLAY I_ ], playback will restart from thefirst track in the original order. However, your programmedplayback can be restarted when you follow the above steps.(Your programs are still stored until either the disc is ejectedor the unit is turned off.)- On some discs, [STOP II] will not work while the resumemessage appears. Please wait until the message disappears.• To repeat the current track in the program, follow the steps 1and 2 in "Repeat Playback" on page 26 and select" TRACK':• To repeat the entire program, follow the steps I and 2 in"Repeat Playback" on page 26 and select" ALL'f• Turning off the unit or opening the disc tray will erase theprogram.• You cannot use [the Number buttons] to select anothertrack during programmed playback. Use [REW _1_1]or[FWD I_4_] to select other tracks in the program.• You cannot combine random playback with programmedplayback.• You cannot alter a programmed order during playback.• You can start programmed playback only while in"PROGRAM" menu.i:!ilili ii,i_iiiZ_iii i!!!!EN