Magnavox LCD 19MF330B Owner's Manual

Also see for 19MF330B -: Owner's manual Owner's manual Owner's manual Owner's manual

Magnavox LCD 19MF330B Owner's Manual Manual pdf 17 page image

English17ENINTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATIONsalut!hola!hi!1111.1TV Screen Display Mode5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of displayp ymodes can be selected for PC input signal.Press FORMAT repeatedly to switch the TV aspect ratio.For 16:9 video signalNormalWide4:3 Movie ExpandZoomNormal displays a 16:9 picture at its original size.4:3 displays a 16:9 picture at a 4:3 size; the pictureis shortened horizontally. Sidebars appear on bothedges of the screen.Movie Expand displays a 16:9 picture that isvertically stretched to fill the screen. This only cropsout the top of the picture.Zoom displays a 16:9 picture at its maximum sizewithout changing its horizontal and vertical ratio.Wide displays a horizontally stretched picture. Thiscrops out the left and right sides of the picture.For 4:3 video signalNormalWide16:9 Movie ExpandZoomNormal displays a 4:3 picture at its original size.Sidebars appear on both edges of the screen.16:9 displays a 4:3 picture at a 16:9 size; the picture isstretched horizontally to fill the screen.Movie Expand displays a 4:3 picture at a 16:9 size;the picture is stretched more vertically at the top ofthe screen. This crops out the top of the picture.Zoom displays a 4:3 picture at a 16:9 size; at itsmaximum size that is more vertically stretched to fillthe screen. This crops out the top and bottom of thepicture.Wide displays the picture with its center at theoriginal size and the edges stretched horizontally tofill the screen.For PC input signalNormal Dot By DotFullNormal displays a proportionately stretched picture.Sidebars appear on both edges of the screen.Full displays a picture that is stretched out ofproportion horizontally to fill the screen.Dot By Dot displays a picture in its original size.Sound Functionsdescribe how to change the audio or the audio language as well as the volume.Volume AdjustmentUse VOL +/− to adjust the volume.will be displayed for a fewseconds when adjusting the volume.Silence ModePress MUTE to turn off the sound temporarily.will be displayed for a few seconds.• Press MUTE again or VOL +/− to recover theoriginal volume.Switching Audio ModeATSCPress SAP repeatedly to cycle through the availablePaudio languages.• Available languages differ depending on thebroadcast.• [Other] is displayed when the audio languagecannot be acquired, or the acquired languages areother than English, Spanish or French.NTSCPress SAP to display the currently selected audio mode.PWhile receiving an MTS broadcast, press repeatedly to cycle through theavailable audio channel.e.g.) When all audio are availableSTEREO : Outputs stereo-audioSAP : Outputs second audio programMONO : Outputs mono-audioMuteEnglish 1/3SAP / STEREOSAP / STEREO SAP / MONO SAP / STEREOVolume 30