ENEN-17D Note• After you make a wired connection, set up necessary network settings. (For network setting of wired connection,refer to “Wired” on page 51.)• If your cable modem does not have router functions, connect a wired router.• If your cable modem has router functions but there is no vacant port, add a hub.• For a wired router, use a router which supports 10BASE-T / 100BASE-TX ETHERNET standard.• Please purchase shielded LAN cables at your local store and use them when you connect to network equipment.■ Wireless ConnectionLAN WANLAN cable (not supplied)InternetNetworking equipment(modem,etc.)Wireless routerD Note• After you made the wireless connection, set up necessary network settings. (For the network setting of wirelessconnection, refer to “Wireless” on page 54.)• For a wireless router, use a router which supports IEEE 802.11 b/g/n. (”n” type is recommended for stableoperation of the wireless network.)• Set the wireless router to Infrastructure mode. This unit does not support Ad-hoc mode.• Other radio devices or obstacles may cause interference to the wireless network connection.
