Magnavox sdtv CD130MW9 Owner's Manual

Also see for CD130MW9: Owner's manual Owner's manual

Contents

Magnavox sdtv CD130MW9 Owner's Manual Manual pdf 11 page image

11ENINITIAL SETTINGWATCHING TV OPTIONAL SETTING OPERATING DVDINTRODUCTION CONNECTION INITIAL SETTING DVD SETTING INFORMATIONTROUBLESHOOTING ESPAÑOLInitial SetupThis section will guide you through the unit’s initial setting which includesselecting a language for your on-screen menu and “AUTO PRESET CH”, whichautomatically scans and memorizes viewable channels.Before you begin:Make sure if the unit is connected to antenna or cable.1 After making all the necessary connections, press[STANDBY-ONy] to turn on the unit.STANDBY-ON• This operation may take a few moments.2 Use [VOL. X/Y] or [CH. K] to select the on-screenlanguage from the choices on the left side of the TVscreen. (ENGLISH / ESPAÑOL / FRANÇAIS)or--- LANGUAGE/IDIOMA/LANGUE ---ENGLISH PRESS VOLYESPAÑOL PRESIONE VOLXFRANÇAIS PRESSEZ CH. K• Press [VOL. Y] for English.• Press [VOL. X] for Spanish.• Press [CH. K] for French.3 Use [VOL. X/Y] to select “AUTO PRESET CH(TV/DTV)”for TV channels or “AUTO PRESET CH(CATV)“ for CATVchannels, then press [CH. K].- INITIAL SETUP -1. PLEASE CONNECT ANTENNAOR CABLE OR SATELLITETO THIS UNIT.2. SET UP THE ITEMS WITHVOL / , AND CH BUTTONS.AUTO PRESET CH (TV/DTV)AUTO PRESET CH (CATV)• Scanning and memorizing the channels automaticallystart.CH 25AUTO PRESET CH(TV/DTV)• When the scanning and memorizing are completed,the lowest memorized channel in the broadcastingwill be displayed.5 Note:• If you connect the cable system directly, contact the CATVinstaller.• If you press [STANDBY-ONy] or [SET-UP] during “AUTOPRESET CH”, this setting will be canceled.• The initial auto channel scan function can be executed foreither TV/DTV or CATV only once. If you want to scan bothTV/DTV and CATV, you need to select “CHANNEL SETUP” inthe main menu to scan and memorize other channels afterinitial presetting is completed. (Refer to page 12.)• You can cancel or exit the initial “AUTO PRESET CH” menu bypressing [SET-UP].• When no channel can be received by “AUTO PRESET CH”,“NO TV SIGNALS” is displayed on the TV screen.• If there is no signal input from the antenna terminal and nooperation for more than several seconds after you turn onthe unit, “HELPFUL HINTS” appears. Follow the instructionslisted on the TV screen.--- H E L P F U L H I N T S ---1 . P L E A S E C H E C K T O S E E I FT H E A N T E N N A / C A B L E /S AT E L L I T E I S P R O P E R LYC O N N E C T E D .2 . D I D Y O U P E R F O R M” A U T O P R E S E T C H ” ?3 . P L E A S E R E F E R T O F R O N TPA G E O F T H E O W N E R ’ SM A N U A L O R R E A R PA N E LF O R S U P P O R T L I N EI N F O R M AT I O N .Main MenuThis section describes the overview of the main menu displayed when youpress [SET-UP].For more details, see the reference page for each item.The main menu consists of the function setting items below.Press [SET-UP] to display the main menu.e.g.) digital TV mode--- TV SETUP ---CHANNEL SETUPV-CHIP SETUPLANGUAGE [ENGLISH]CAPTION [OFF]DTV SETUP• CHANNEL SETUPYou can automatically scan the viewable channels andremove those that are undesired.(Refer to “Auto Channel Scan” on page 12.)• V-CHIP SETUPYou can set the viewing limitations.(Refer to “V-chip” on page 19.)• LANGUAGEYou can change the language (English, Spanish orFrench) displayed on the main menu.(Refer to “Language Selection” on page 12.)• CAPTIONYou can change the display format for closed caption,which displays the dialogue of a TV program or otherinformation across the TV screen.(Refer to “Closed Caption” on page 17.)• DTV SETUPYou can set the screen display or caption in the DTVmode. (Refer to “DTV Closed Caption” on page 18.)5These operations are accessible by remote control. Some may also be accessible by controls on the main unit.TV Functions