Magnavox sdtv CD130MW9 Owner's Manual

Also see for CD130MW9: Owner's manual Owner's manual

Contents

Magnavox sdtv CD130MW9 Owner's Manual Manual pdf 16 page image

16ENO PTIONAL SETTINGChannel Add/DeleteThe channel add/delete function lets you add the channel that was notadded by the auto channel scan due to the reception status at the initialsetting. You can also delete the unnecessary channels.1 Press [SET-UP] to display the main menu.2 Use [Cursor K / L] to select “CHANNEL SETUP”, thenpress [ENTER].e.g.) digital TV modeor--- TV SETUP ---CHANNEL SETUPV-CHIP SETUPLANGUAGE [ENGLISH]CAPTION [OFF]DTV SETUP3 Use [Cursor K / L] to select “ADD/DELETE(DTV)” or“ADD/DELETE”, then press [ENTER].e.g.) digital TV modeor --- CHANNEL SETUP ---ADD/DELETE (DTV)AUTO PRESET CH (DTV)AUTO PRESET CH (TV/DTV)AUTO PRESET CH (CATV)! CATV takes approx. 50min.4 Select the channel you want to add or delete.(Refer to “Channel Selection“ on page 13.)e.g.) digital TV modeADD/DELETE : DTVD255 Press [ENTER] repeatedly to select “ADD” or “DELETE”.• To add or delete another channels, repeat steps 4 to 5.• Color of channel number displayed at the right top ofthe TV screen indicates;- Blue: The selected channel will be added.- Red: The selected channel will be deleted.6 Press [SET-UP] to exit.Note:• “ADD/DELETE (DTV)” or “ADD/DELETE (TV)” menu will dis-appear automatically in about 10 seconds.• In the digital mode (DTV), you can add or delete channelsonly for major channel.• Once you delete a DTV channel, you cannot recover thechannel without performing auto channel scan again.(Refer to “Auto Channel Scan” on page 12.)5 Picture AdjustmentYou can adjust brightness, contrast, color, tint and sharpness.1 Press [PICTURE/SLEEP] repeatedly until the desiredpicture menu appears.[SLEEP][BRIGHT][CONTRAST][COLOR][TINT][SHARPNESS]2 Within 10 seconds, use [Cursor { / B] to adjust thequality.or[Cursor { ] [Cursor B]BRIGHT to decrease brightness to increase brightnessCONTRAST to decrease contrast to increase contrastCOLOR to decrease color to brighten colorTINT to add purple to add greenSHARPNESS to make soft to make clear5