Magnetek CHTX Instruction Manual

Magnetek CHTX Instruction Manual Manual pdf 23 page image

Enrange CHTX Transmitter Instruction ManualDecember 2017Page 23 of 473.8 Normal Operating Mode with Optional Graphic UserInterfaceIn normal operating mode, the CHTX displays real-time information relating to the operation of thetransmitter on the graphic user interface. Information may include Command Confirmation, Battery Life,Signal Strength, Two-Way Feedback, etc.Fig. 12: Normal Operating Screen on Graphic User Interface3.8.1 Watchdog Indicator (Spinning Arrow)The spinning arrow represents the watchdog timer within the CPU of the unit.NOTE: The arrow should be continuously spinning at all times. If the arrow is notspinning, the transmitter must be rebooted to operate properly.3.8.2 Command ConfirmationEach time the user operates a control on the transmitter, a message will be displayedon the graphic user interface screen confirming what is being operated.For example, if the second paddle is moved to its 4th position in the UP direction, thedisplay will show the following:MTN2 D1 SP=4This translates to ‘Motion 2, Direction 1, Speed 4’3.8.3 Battery Life IndicatorRemaining battery life is displayed in the bottom left hand corner of the graphic userinterface screen.Battery life is displayed in 5% increments.NOTE: If using an optional battery pack different from what the unit was shipped fromthe factory with, the battery life indicator will be inaccurate unless the dip switch settingsare set to the correct battery type being used. See Section 3.2.3 on page 16 for detailsto properly set the dip switches.NOTE: The battery life indicator will only show accurate battery life when usingMagnetek-approved battery packs.