Magnum Energy ME-RTR Owner's Manual
                                                                                | |
Contents
| 
23 © 2010 Magnum Energy, Inc.3.0 Setup01 Router SetupThe following menus are used to set up the router screen and clock.01A Set Time: The router contains a real time clock that must be setfor proper operation of some features. These features are: the SETUPbutton’s 02C AC In-Time, 04B Gen Run Time, 04G Quiet Time, 04H GenExercise, and the Fault History menu items under the TECH button.**IMPORTANT**It is very important that you set the time clock as it is a critical piece ineffectively addressing fault issues, as well as for the proper start/stopfunctions of your AGS device, if installed.Info: The clock obtains power from the inverter and will reset ifthe router is disconnected from the inverter.To Set the Current TimeFrom the Set Clock menu:Rotate the SELECT knob to the hour of day, and then pressSELECT.Rotate the SELECT knob to the correct minute setting, and thenpress SELECT.Rotate the SELECT knob to the appropriate AM or PM setting, andthen press SELECT.01B Display: This setting adjusts the contrast and brightness of theLCD screen based on the current lighting conditions and viewing angle.Default settings - Contrast = 100%, Brightness = 50%01C Power Save: This setting turns off the Power Save™ feature, orselects the time (from off to 60 minutes) that determines when thedisplay goes into Power Save mode. This setting also allows the Port LEDsto be turned “off” or set to “Auto” mode. In Auto mode, the Port LEDsautomatically blink whenever a device is connected to a router port.Default setting - PowerSave [min] = 15, Port LEDs = AutoWhat is the Power Save feature? The Power Save feature turns off theLCD backlight and the LEDs on the router to conserve energy. The routergoes into Power Save mode if there hasn’t been a button press or faultmessage for a period of time (this time is determined by the SETUP menu’s01C Power Save setting). Whenever the router goes into the Power Savemode, the LCD backlight and the LEDs can be reactivated by pressing anybutton. If you have a fault during the Power Save mode, the LCD backlightand the FAULT LED will come on and stay on as long as the fault is present.Info: If you want the LCD backlight and LEDs to always be on,you will need to turn the Power Save feature off by selectingPowerSave [min] = off.Info: If you want the Port LEDs to always be off, you will needto set the Port LEDs to Port LEDs = off.01D Temp Display: This menu item selects whether to displaytemperatures in Fahrenheit or Celsius. Once you select either Fahrenheitor Celsius, the following menu items will appear with this selection:•1.2.3.••• |
Related manuals for Magnum Energy ME-RTR
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine