Magnum Energy MMS1012 Owner's Manual

Also see for MMS1012: Owner's manual

Contents

Magnum Energy MMS1012 Owner's Manual Manual pdf 10 page image

© 2010 Magnum Energy, Inc.Figure 3, Top and Left Side Features1. Inverter Status Indicator - this green LED illuminates to provideinformation on the inverter’s operation.2. Power Switch - momentary pushbutton switch that turns theinverter on or off.3. Negative DC Terminal (black) - the inverter’s connection to thenegative terminal on the battery bank.4. Positive DC Terminal (red) - the inverter’s connection to thepositive terminal on the battery bank.5. Input Circuit Breaker - this circuit breaker protects the unit’sinternal wiring and pass-thru relay.6. Output Circuit Breaker - this circuit breaker provides anotherlayer of overload protection. Not a branch circuit-rated breaker.Separate AC output breakers may be required on the output.7. Mounting Flanges (x4) - secures the inverter to shelf/wall.8. AC Wiring Compartment - provides access for all AC input andoutput connections on the inverter.9. AC Output Connection - AC knockout for hardwiring ACoutput.10. AC Input Connection - Strain relief clamp for hardwiring ACinput. Strain relief comes with an attached flexible AC input powercord on the MMS1012- G model.11. DC Ground Terminal - this connection is used to tie the exposedchassis of the inverter to the DC grounding system. This terminalaccepts CU/AL conductors from #14 AWG to #6 AWG.12. GFCI Outlet - Ground Fault Circuit Interrupter outlet (with testand reset capability). Only available on MMS1012-G model.41.0 Introduction1 234567810 91112