Maico MA 42 Operation Manual

Also see for MA 42: Operation manual Quick guide Operating instructions Manual Service manual

Contents

Maico MA 42 Operation Manual Manual pdf 41 page image

Operation Manual MA 428100460 Rev.7 Ver.1 36 12/15MonitoringAll signals presented to the patient can be monitored by the examiner via amonitoring headset or the speakers integrated in the device. For this purpose,press the monitor button (6) and the monitor screen will appear. The monitorlevel of the left and right channel can be adjusted with the correspondinglevel control dial (1). The integrated speaker is switched on by pressing thebutton (13) and the external headset via the functional selector button (11). Inorder to hear the signal given to the patient, make sure to activate thecorresponding channel for monitoring (buttons 9 and 17).The talk back microphone is activated by the button (15) and its level adjustedby the frequency up and down buttons (4), (5).Talk ForwardConnect the microphone headset to the microphone socket (8) on the rearside of the device. A gooseneck microphone can also be connected.Note: Only connect the microphone when the unit is off.To talk to the patient press and hold the Stim/Talk button (8) and speak intothe microphone. Pressing only one Stim /Talk button is required to activatethis feature. Adjust the level by the left or right level control (1) while holdingdown the Stim /Talk button.Documentation of the ResultsAll stored results can be directly printed by a USB printer. Make sure that acompatible printer is connected to the USB port (4) and the device is correctlyconfigured to the connected printer (refer to Menu Settings chapter 7.2).The results can also be stored as PDF file on an SD memory card or USB flashdrive to be transferred to a PC for further usage. The PDF file contains all theFigure 15 - Example for Monitoring Setting