Makita 1806B Instruction Manual

Also see for 1806B: Instruction manual Parts Breakdown Instruction manual Instruction manual Instruction manual

Contents

5WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product.MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Adjusting depth of cut1002563Depth of cut may be adjusted by simply turning the knobon the front of the tool.Switch actionCAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly and returnsto the "OFF" position when released.For tool without lock button and lock-off button1004880To start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For tool with lock button12004883To start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For continuous operation, pull the switch trigger and thenpush in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.For tool with lock-off buttonTo prevent the switch trigger from being accidentallypulled, a lock-off button is provided.To start the tool, depress the lock-off button and pull theswitch trigger. Release the switch trigger to stop.ASSEMBLYCAUTION:• Always be sure that the tool is switched off andunplugged before carrying out any work on the tool.Removing or installing planer blades12002560CAUTION:• Tighten the blade installation bolts carefully whenattaching the blades to the tool. A loose installationbolt can be dangerous. Always check to see theyare tightened securely.• Handle the blades very carefully. Use gloves orrags to protect your fingers or hands whenremoving or installing the blades.• Use only the Makita wrench provided to remove orinstall the blades. Failure to do so may result inovertightening or insufficient tightening of theinstallation bolts. This could cause an injury.To remove the blades on the drum, unscrew the fiveinstallation bolts with the hex wrench. The drum covercomes off together with the blades.1. Hex wrench2. Bolt1. Lock button /Lock-off button2. Switch trigger1. Switch trigger1. Knob