Makita 1902 Instruction Manual

Also see for 1902: Parts Breakdown Quick guide Instruction manual Parts Breakdown Instruction manual

Contents

5value depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-15For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Power PlanerModel No./ Type: 1902are of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England30.1.2009000230Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPANGEA010-1General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions forfuture reference. GEB010-4PLANER SAFETY WARNINGS1. Wait for the cutter to stop before setting thetool down. An exposed cutter may engage thesurface leading to possible loss of control andserious injury.2. Hold the power tool by insulated grippingsurfaces only, because the cutter may contactits own cord. Cutting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.3. Use clamps or another practical way to secureand support the workpiece to a stable platform.Holding the work by hand or against your bodyleaves it unstable and may lead to loss of control.4. Rags, cloth, cord, string and the like shouldnever be left around the work area.5. Avoid cutting nails. Inspect for and remove allnails from the workpiece before operation.6. Use only sharp blades. Handle the blades verycarefully.7. Be sure the blade installation bolts aresecurely tightened before operation.8. Hold the tool firmly with both hands.9. Keep hands away from rotating parts.10. Before using the tool on an actual workpiece,let it run for a while. Watch for vibration orwobbling that could indicate poor installationor a poorly balanced blade.11. Make sure the blade is not contacting theworkpiece before the switch is turned on.12. Wait until the blade attains full speed beforecutting.13. Always switch off and wait for the blades tocome to a complete stop before any adjusting.14. Never stick your finger into the chip chute.Chute may jam when cutting damp wood.Clean out chips with a stick.15. Do not leave the tool running. Operate the toolonly when hand-held.16. Always change both blades or covers on thedrum, otherwise the resulting imbalance willcause vibration and shorten tool life.17. Use only Makita blades specified in thismanual.18. Always use the correct dust mask/respiratorfor the material and application you areworking with.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product.MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.

/ 52

Related manuals for Makita 1902

Makita 1902 Instruction Manual

Makita M1902 Instruction Manual

This manual is suitable for:

1902

manualsdatabase

Your AI-powered manual search engine