Makita 1902 Instruction Manual
Also see for 1902: Parts BreakdownQuick guideInstruction manualParts BreakdownInstruction manual
                            |
411. Always switch off and wait for the blades tocome to a complete stop before any adjusting.12. Never stick your finger into the chip chute.Chute may jam when cutting damp wood.Clean out chips with a stick.13. Do not leave the tool running. Operate the toolonly when hand-held.14. When leaving the planer, switch off and set itwith the front base up on a wooden block, sothat the blades do not contact anything.15. Always change both blades or covers on thedrum, otherwise the resulting imbalance willcause vibration and shorten tool life.16. Wait for complete run-down before putting thetool aside.17. Use only Makita blades specified in thismanual.18. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury. USD201-2SymbolsThe followings show the symbols used for tool.･ volts･ amperes･ hertz･ alternating current･ no load speed･ Class II Construction･ revolutions or reciprocation per minuteFUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Adjusting depth of cut1002549Depth of cut may be adjusted by simply turning the knobon the front of the tool.Switch action12002553CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.• Switch can be locked in "ON" position for ease ofoperator comfort during extended use. Applycaution when locking tool in "ON" position andmaintain firm grasp on tool.To start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For continuous operation, pull the switch trigger andthen push in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.1. Lock button2. Switch trigger1. Knob |
Related manuals for Makita 1902
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita 1902 Instruction Manual
Makita M1902 Instruction Manual
Makita M1902 Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine