8Then install the rear cover with the screws.12005050CAUTION:• Do not turn the tool on without the rear coverinstalled in place.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers,always using Makita replacement parts.ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Straight & groove forming bits• Edge forming bits• Laminate trimming bits• Straight guide assembly• Trimmer guide assembly• Templet guide 25• Templet guides• Templet guide adapter• Lock nut• Collet cone 12 mm, 1/2"• Collet sleeve 3/8", 1/4"• Collet sleeve 6 mm, 8 mm, 10 mm• Wrench 21• Wrench 23Router bitsStraight bit005116mmD A L 1 L 261/4"8 8 60 2561/4"61/4" 6 50 188 50 1820 50 151/2"121/2"1212 60 3010 60 25006452"U"Grooving bitR005117mmD A L 1 L 2 R6 6 50 18 30064531. Brush holdercap2. Screwdriver