Makita 3612C Instruction Manual

Also see for 3612C: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,outlet, etc.) be sure the voltage supplied is the same as that specified on thenameplate of the tool. A power source with voltage greater than that specifiedfor the tool can result in SERIOUS INJURY t o the user - as well as damage t othe tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source withvoltage less than the nameplate rating is harmful t o the motor.ADDITIONAL SAFETY RULES1. Wear hearing protection during extended period of operation.2. Handle the bits very carefully.3. Check the bit carefully for cracks or damage before operation. Replace4. Avoid cutting nails. Inspect for and remove all nails from the workpiece5. Hold the tool firmly with both hands.6. Keep hands away from rotating parts.7. Make sure the bit is not contacting the workpiece before the switch is turned8. Before using the tool on an actual workpiece. let it run for a while. Watch9. Be careful of the bit rotating direction and the feed direction.cracked or damaged bit immediately.before operation.on.for vibration or wobbling that could indicate improperly installed bit.IO. Do not leave the tool running. Operate the tool only when hand-held.11. Always switch off and wait for the bit t o come t o a complete stop before12. Do not touch the bit immediately after operation; it may be extremely hotremoving the tool from workpiece.and could burn your skin.SAVE THESE INSTRUCTIONS.4