Makita 3709 User Manual

Also see for 3709: Parts Breakdown Instruction manual Instruction manual Instruction manual Instruction manual

10Align the center hole in the straight guide with the center of the circle to be cut.Drive a nail less than 6 mm in diameter into the center hole to secure thestraight guide. Pivot the tool around the nail in clockwise direction.Trimming, curved cuts in veneers for furniture and the like can be done easilywith the trimmer guide. The guide roller rides the curve and assures a fine cut.Install the trimmer guide on the tool base with the clamp screw (A). Loosen theclamp screw (B) and adjust the distance between the bit and the trimmer guideby turning the adjusting screw (1 mm per turn). At the desired distance, tightenthe clamp screw (B) to secure the trimmer guide in place.When cutting, move the tool with the guide roller riding the side of the work-piece.1. Nail2. Center hole3. Straight guide1230066250066261. Clamp screw (A)2. Adjusting screw3. Clamp screw (B)4. Trimmer guide12340066211. Workpiece2. Bit3. Guide roller123001998