Makita 6041D Instruction Manual

Also see for 6041D: Instruction manual Instruction manual

Contents

5FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off beforeadjusting or checking function on the tool.ChargingConnect the charging plug to the charging connector,then plug in the charger to the power receptacle. Charg-ing takes 3 hours.CAUTION:• The battery in your new tool is not fully charged.You will need to charge it before use.• Do not operate the tool during charging.• Overcharging more than 2 days considerably short-ens the battery service life.Always unplug the charger after completing thecharge.Switch actionFor 6041D, 6043D and 6076DTo start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.For 6176DTo start the tool, simply pull the switch trigger. Tool speedis increased by increasing pressure on the switch trigger.Release the switch trigger to stop.Reversing switch actionThis tool has a reversing switch to change the direction ofrotation. Move the reversing switch lever to the “FWD”position for clockwise rotation or the “REV” position forcounterclockwise rotation.When the reversing switch lever is in the neutral position,the switch trigger cannot be pulled.CAUTION:• Always check the direction of rotation before opera-tion.• Use the reversing switch only after the tool comesto a complete stop. Changing the direction of rota-tion before the tool stops may damage the tool.• When not operating the tool, always set the revers-ing switch lever to the neutral position.Overload protector (for 6176D only)The overload protector automatically cuts out to breakthe circuit whenever heavy work is prolonged. Wait 20 -30 seconds before resuming operation.ASSEMBLYCAUTION:• Always be sure that the tool is switched off beforecarrying out any work on the tool.Installing or removing driver bit or drill bitCAUTION:• Always set the reversing switch lever to the neutralposition before installing or removing the bit.For 6043D, 6076D and 6176D1. Charging plug1. Switch trigger100205910022681. Reversingswitch lever1. Tighten2. Sleeve3. Ring10020741 23002112