2SPECIFICATIONS• Manufacturer reserves the right to change specifications without notice.• Specifications may differ from country to country.GENERAL SAFETY RULES USA001-2(For All Tools)WARNING:Read and understand all instructions. Failure to follow allinstructions listed below, may result in electric shock, fire and/orserious personal injury.SAVE THESE INSTRUCTIONSWork Area1. Keep your work area clean and well lit.Cluttered benches and dark areas invite acci-dents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases, or dust. Powertools create sparks which may ignite the dustor fumes.3. Keep bystanders, children, and visitorsaway while operating a power tool. Distrac-tions can cause you to lose control.Electrical Safety4. Grounded tools must be plugged into anoutlet properly installed and grounded inaccordance with all codes and ordi-nances. Never remove the groundingprong or modify the plug in any way. Donot use any adaptor plugs. Check with aModel 6910Capacities Bolt size M22 - M24 (7/8” - 1”)Square drive 25.4 mm (1”)No load speed (RPM) 1,400/min.Impacts per minute 1,500Max. fastening torque 980 N.m (722 ft.lbs)Overall length 389 mm (15-1/4”)Net weight 9 kg (19.8 lbs)