Makita 6910 Instruction Manual

Also see for 6910: Parts list Parts Breakdown Instruction manual

Contents

8Installing or removing socketTo install the socket, push it onto the anvil of the tool until itlocks into place.To remove the socket, simply pull it off.OPERATION The proper fastening torque may differ depending upon thekind or size of the bolt, the material of the workpiece to befastened, etc. The relation between fastening torque and fas-tening time is shown in the figure.Hold the tool firmly and place the socket over the bolt or nut.Turn the tool on and fasten for the proper fastening time.1. Socket2. Anvil12002340N.m (ft.lbs)400(288)500(361)600(433)700(505)800(577)900(649)1,000(722)1,100(794)1,200(866)1,300(938)1,400(1,010)300(216)200(144)100(72)0 1 2 3 4 5 6(S)Tightening timeTightening torqueRated voltage90% of rated voltage002356