Makita 6935FD Instruction Manual

Also see for 6935fd: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

2ENGLISH (Original instructions)SPECIFICATIONSModel 6935FDMachine screw 4 mm - 8 mmStandard bolt 5 mm - 14 mmCapacitiesHigh tensile bolt 5 mm - 12 mmNo load speed (min -1) 0 - 2,600Impacts per minute 0 - 3,200Overall length 163 mmNet weight 1.7 kgRated voltage D.C. 14.4 V• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-3SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility. ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic. ENG102-2For European countries onlyNoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA) : 93 dB(A)Sound power level (LWA) : 104 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG205-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-2:Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 19.5 m/s 2Uncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH101-12EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Cordless Impact DriverModel No./ Type: 6935FDare of series production andConforms to the following European Directives:98/37/EC until 28th December 2009 and then with2006/42/EC from 29th December 2009And are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd,