Makita 6935FD Instruction Manual

Also see for 6935fd: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

6Lighting up the front lamp1004910CAUTION:• Do not look in the light or see the source of lightdirectly.Pull the switch trigger to light up the lamp. The lampkeeps on lighting while the switch trigger is being pulled.NOTE:• Use a dry cloth to wipe the dirt off the lens of lamp.Be careful not to scratch the lens of lamp, or it maylower the illumination.Reversing switch action1 1A B004911This tool has a reversing switch to change the directionof rotation. Depress the reversing switch lever from the Aside for clockwise rotation or from the B side forcounterclockwise rotation.When the reversing switch lever is in the neutral position,the switch trigger cannot be pulled.CAUTION:• Always check the direction of rotation beforeoperation.• Use the reversing switch only after the tool comesto a complete stop. Changing the direction ofrotation before the tool stops may damage the tool.• When not operating the tool, always set thereversing switch lever to the neutral position.ASSEMBLYCAUTION:• Always be sure that the tool is switched off and thebattery cartridge is removed before carrying outany work on the tool.Installing or removing driver bit or socket bit004521Use only the driver bit or socket bit shown in the figure.Do not use any other driver bit or socket bit.For European and North & South Americancountries, Australia and New ZealandA=12mmB=9mmUse only these type of bit. Follow theprocedure (1).(Note) Bit-piece is not necessary.006348For other countriesTo install these types of bits, followthe procedure (1).(Note) Makita bits are these types.To install these types of bits, followthe procedure (2).(Note) Bit-piece is necessary forinstalling the bit.A=17mmB=14mmA=12mmB=9mm0063491. To install the bit, pull the sleeve in the direction ofthe arrow and insert the bit into the sleeve as faras it will go. Then release the sleeve to secure thebit.1. Reversingswitch lever1. Lamp