Makita BHP446 Instruction Manual

Also see for BHP446: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

9NOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.Noise ENG905-1The typical A-weighted noise level determined accordingto EN60745:Model BHP446Sound pressure level (L pA ): 80 dB (A)Uncertainty (K): 3 dB (A)The noise level under working may exceed 80 dB (A).Model BHP456Sound pressure level (L pA ): 81 dB (A)Sound power level (LWA): 92 dB (A)Uncertainty (K): 3 dB (A)Wear ear protection.Vibration ENG900-1The vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model BHP446Work mode: impact drilling into concreteVibration emission (ah,ID ): 6.5 m/s2Uncertainty (K): 1.5 m/s 2Work mode: drilling into metalVibration emission (ah,D ): 2.5 m/s2 or lessUncertainty (K): 1.5 m/s 2Model BHP456Work mode: impact drilling into concreteVibration emission (ah,ID ): 8.0 m/s2Uncertainty (K): 1.5 m/s 2Work mode: drilling into metalVibration emission (ah,D ): 2.5 m/s2 or lessUncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation of exposure inthe actual conditions of use (taking account of all partsof the operating cycle such as the times when the toolis switched off and when it is running idle in addition tothe trigger time).For European countries only ENH101-15EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Cordless Hammer Driver DrillModel No./ Type: BHP446, BHP456are of series production andConforms to the following European Directives:2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.,Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England28. 10. 2010Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN