Makita BHX2501 Instruction Manual

Also see for BHX2501: Instruction manual Instruction manual Instruction manual

Contents

8ASSEMBLY INSTRUCTIONSCAUTION : Before performing any work on the blower, always stopthe engine and pull the spark plug connectors off thespark plug.Always wear protective gloves!CAUTION : Start the blower only after having assembled it com-pletely.1. ASSEMBLY OF BLOWER PIPES1) Align grooves in the blower pipe with pegs on the blowerhousing and slide the pipe onto housing.2) Turn the blower pipe clockwise to lock it into place.3) Place clamp around the opening of the blower pipe. Fas-ten securely with bolt and nut .2. ASSEMBLY OF VACUUM ATTACHMENT1) Installing Vacuum pipe (nozzle)(1) Loosen the screw and open the protector .It is dangerous to operate the machine with the screw loosened.The operator’s finger or clothing may be caught in the impeller, which willresult in a serious accident.Caution : The engine will not start unless the protector is closedcompletely.(2) Align the indicated on the vacuum pipe with the “ ” indi-cated on the blower. Then insert the vacuum pipe into theblower.(3) Turn the vacuum pipe until the is aligned with the “ ”indicated on the blower to lock the vacuum pipe.(4) Fasten the vacuum pipe securely to the blower with screwand bracket .Caution : Do not perform the fastening operation in (4) above if theblower is to be used in a country or region where the CE markis not applicable.Caution : The screw do not tighten strongly too much.Caution : The engine will not start unless the vacuum pipe is mountedcompletely.WARNING!Always hold the mounting end of the vacuum pipe when attaching/detaching the vacuum pipe.2) Installing Elbow and Dust Bag(1) Open the fastener of the dust bag.(2) Insert the elbow into the dust bag and take it out through thebag’s entry.(3) Install the elbow on the blower.(4) Place clamp around the opening of the elbow. Fastensecurely with bolt and nut .Caution : Do not perform the fastening operation in (4) above if theblower is to be used in a country or region where the CE markis not applicable.Always mount the protector/vacuum pipe in the right way before opera-tion. Operation without the protector/vacuum pipe is dangerous, theimpeller may catch the operator’s fingers or clothes and it can result inserious injury.Do not attempt to remove the screw (1) or disassemble the vacuum pipe.Regulation requires safety distance of at least 900 mm between theimpeller and the top of the pipe.WARNING!When using this machine as a blower, be sure to confirmthat the screw is not loosened at each time of startup. Ifthe screw is loosened, retighten it.WARNING!Do not attempt to pick up large wood chips, metals,glass, stones, liquids, lighted cigarettes, fire works orthe like.

/ 53

Related manuals for Makita BHX2501

Makita BHX2501 Instruction Manual

Makita BHX2500 Instruction Manual

This manual is suitable for:

BHX2501

manualsdatabase

Your AI-powered manual search engine