Makita BJV140 Instruction Manual

Also see for BJV140: Instruction manual Instruction manual Instruction manual Instruction manual Technical information

Contents

Makita BJV140 Instruction Manual Manual pdf 8 page image

8Cover plate12007503Use the cover plate when cutting decorative veneers,plastics, etc. It protects sensitive or delicate surfacesfrom damage. Fit it on the back of the tool base.Anti-splintering device12007504For splinter-free cuts, the anti-splintering device can beused. To install the anti-splintering device, move the toolbase all the way forward and fit it from the back of toolbase. When you use the cover plate, install theanti-splintering device onto the cover plate.CAUTION:• The anti-splintering device cannot be used whenmaking bevel cuts.Dust extractionThe dust nozzle (optional accessory) is recommended toperform clean cutting operations.12001921To attach the dust nozzle on the tool, insert the hook ofdust nozzle into the hole in the base.The dust nozzle can be installed on either left or rightside of the base.001922Then connect a Makita vacuum cleaner to the dustnozzle.12007495OPERATIONCAUTION:• Always hold the base flush with the workpiece.Failure to do so may cause blade breakage,resulting in a serious injury.12007487Turn the tool on without the blade making any contactand wait until the blade attains full speed. Then rest thebase flat on the workpiece and gently move the toolforward along the previously marked cutting line.NOTE:• If the tool is operated continuously until the batterycartridge has discharged, allow the tool to rest for15 minutes before proceeding with a fresh battery.When cutting curves, advance the tool very slowly.1. Cutting line2. Base1. Dust nozzle2. Hose for vacuumcleaner1. Dust nozzle2. Base1. Base2. Anti-splinteringdevice1. Cover plate2. Base