Makita BLM430 Technical Information

Also see for BLM430: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

R epairP 5/ 8[2] ASSEMBLY/ DISASSEMBLY[2]-3. Change lever section(1) Remove Cowling. (Refer to the previous page.)(2) Shift Change lever to the position of grass cutting height 75mm.(3) Detach the hook of Tension spring 16 from the projection of Deck using long-nose pliers. (Fig. 17)(4) Put a wood under Deck to raise Wheels from the ground. (Fig. 18)(5) Unscrew two 4x18 Tapping screws, and separate the pin of Connecting rod from the hole of Change lever,and then remove Change lever section from Deck toward DC motor side. (Fig. 19)(6) Remove Change lever cover, and then separate screws, bolt and nut as drawn in Fig. 20.DISASSEMBLINGASSEMBLINGFig. 17Fig. 20Fig. 19Fig. 18Fig. 21Long-nosepliershook ofTensionspring 16Change leverChange leverAdjust plate4x18 Tapping screw(2 pcs.)Change leverM6x30Hex boltSleeve 6ChangelevercoverAdjust plateCompression spring 9Flat washer 9Flat washer 4M6 Hex nut4x18 TappingscrewAssemble Change lever section in the reverse order of disassembly.Note: Lift Connecting rod and insert the pin into the hole of Connecting rod. (Fig. 21)4x18 Tappingscrew (2 pcs.)Connecting rodWoodhole of Change leverpin of Connecting rodprojection of Deck

/ 8

Related manuals for Makita BLM430