4ENGLISHExplanation of general viewSPECIFICATIONS• Due to our continuing program of research and development, the specifications herein are subject to change withoutnotice.• Note: Specifications may differ from country to country.IMPORTANT SAFETYINSTRUCTIONSWARNING:When using electric tools, basic safety precautions shouldalways be followed to reduce the risk of fire, electricshock, and personal injury, including the following:READ ALL INSTRUCTIONS.1. Read this instruction manual and the charger instruc-tion manual carefully before use.2. This flashlight is not waterproof. Do not use it in dampor wet locations. Do not expose it to rain or snow. Donot wash it in water.3. A short-circuit can cause a large current flow, over-heating, possible burns and even a breakdown.(1) Do not touch the inside of the flashlight head withtweezers, metal tools, etc.(2) Do not touch the battery terminals with any con-ductive material.(3) Avoid storing the battery cartridge in a containerwith any metal objects such as nails, coins, etc.4. Never expose the battery cartridge to flames, fire orgreat heat. Breakage may cause release of injuriousmaterial.5. If electrolyte gets into your eyes, rinse them out withclear water and seek medical attention right away. Itmay result in loss of your eyesight.6. If operating time has become excessively shorter, stopoperating immediately. It may result in a risk of over-heating, possible burns and even an explosion.7. Be careful not to drop, shake or strike battery.8. When the tool is not in use, always switch off andremove the battery cartridge from the tool.9. Do not store the tool and battery cartridge in locationswhere the temperature may reach or exceed 50°C(122°F).10. Do not give the tool a shock by dropping, striking, etc.11. Do not expose the light to eyes continuously. It mayhurt them.12. Do not cover or clog the lit tool with cloth or carton,etc. It may create a risk of fire.13. Switch off the light immediately when the lamp getsdark in use. If you leave the lamp switched on, the bat-tery cartridge capacity may decrease.14. Do not disassemble the charger or battery cartridge;take it to a qualified serviceman when service or repairis required. Incorrect reassembly may result in a riskof electric shock or fire.15. If any problem develops, consult your nearest MakitaService Center or dealer. To maintain product safetyand reliability, repairs, maintenance or adjustmentshould be carried out by Makita Authorized ServiceCenter.SAVE THESE INSTRUCTIONS.1. Battery cartridge2. Button3. Red part4. Switch5. Ring6. Bulb7. Shoulder strapModel BML145 BML185Bulb 12 V 0.7 A 18 V 0.6 ADimensionsL 284 mm (11 - 1/8”) 284 mm (11 - 1/8”)W 84 mm (3 - 5/16”) 84 mm (3 - 5/16”)H 96 mm (3 - 3/4”) 96 mm (3 - 3/4”)Net weight (without battery) 0.36 kg (0.79 lbs) 0.36 kg (0.79 lbs)