2ENGLISHSPECIFICATIONSModel BTD130F BTD140 BTD141 BTD142Machine screw 4 mm - 8 mmStandard bolt 5 mm - 14 mmCapacitiesHigh tensile bolt 5 mm - 12 mmNo load speed (min -1) 0 - 2,400 0 - 2,300Impacts per minute 0 - 3,200Overall length 146 mm 145 mm 146 mmNet weight 1.4 kg 1.5 kg 1.3 KgRated voltage D.C.14.4 V D.C.18 V• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Note: Specifications may differ from country to country.END004-2SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.・ Read instruction manual.・ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility. ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic.For Model BTD130F ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto EN60745-2-2:Sound pressure level (LpA) : 90 dB(A)Sound power level (LWA) : 101 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG205-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-2:Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 14 m/s2Uncertainty (K) : 1.5 m/s 2For Model BTD140,BTD141,BTD142 ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto EN60745-2-2:Sound pressure level (LpA) : 90 dB(A)Sound power level (LWA) : 101 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG205-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-2:Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 17 m/s2Uncertainty (K) : 1.5 m/s 2ENH102-7EC-DECLARATION OF CONFORMITYModel; BTD130F,BTD140,BTD141,BTD142We declare under our sole responsibility that thisproduct is in compliance with the following standards ofstandardized documents;EN60745, EN55014 in accordance with CouncilDirectives, 2004/108/EC, 98/37/EC.CE2007000230Tomoyasu KatoDirectorResponsible Manufacturer:Makita Corporation3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPANAuthorized Representative in Europe:Makita International Europe Ltd.Michigan Drive, Tongwell, Milton Keynes, Bucks MK158JD, ENGLAND