Makita BUH550 User Manual

Also see for BUH550: Instruction manual Instruction manual Instruction manual Technical information Instruction manual

5ENGLISH (Original instructions)Explanation of general view1-1. Red indicator1-2. Button1-3. Battery cartridge2-1. Switch trigger B2-2. Switch trigger A3-1. Adjusting dial4-1. Hook4-2. Belt7-1. Trimming direction7-2. Hedge surface to be trimmed7-3. Tilt the blades.8-1. String12-1. Press12-2. Chip receiver12-3. Nut12-4. Shear blade13-1. Nut13-2. Branch catcher14-1. Hooks14-2. Fit the hooks into groove14-3. Grooves15-1. Press the levers on both sides15-2. Unlock the hooks16-1. Blade cover16-2. Screws17-1. Under cover17-2. Blade cover18-1. Plate19-1. Crank20-1. Screws20-2. Shear blade21-1. Crank22-1. Oval hole of shear blade24-1. Oval hole of shear blade24-2. Crank25-1. Crank26-1. Limit mark27-1. Holder cap cover27-2. Screwdriver28-1. Brush holder cap28-2. ScrewdriverSPECIFICATIONSModel BUH550 UH550D BUH650 UH650DBlade length 550 mm 650 mmStrokes per minute (min -1) 1,000 - 1,800 1,000 - 1,800Overall length 1,070 mm 1,074 mm 1,150 mm 1,154 mmNet weight 5.1 kg 5.2 kgRated voltage D.C.36 V D.C.36 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END013-3SymbolThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Do not expose to rain.･ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of European Directive2012/19/EU on waste electric andelectronic equipment, 2006/66/EC onbatteries and accumulators and wastebatteries and accumulators and theirimplementation in accordance withnational laws, electric equipment andbattery pack that have reached the endof their life must be collected separatelyand returned to an environmentallycompatible recycling facility. ENE014-1Intended useThe tool is intended for trimming hedges.ENG905-1NoiseThe typical A-weighted noise level determinedaccording to EN60745:Model BUH550,UH550DSound pressure level (LpA) : 85.1 dB(A)Sound power level (LWA) : 93.1 dB(A)Uncertainty (K) : 2.5 dB(A)Model BUH650,UH650DSound pressure level (LpA) : 84.3 dB(A)Sound power level (LWA) : 92.3 dB(A)Uncertainty (K) : 2.5 dB(A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Model BUH550,UH550DWork mode : hedge trimmingVibration emission (ah ) : 2.5 m/s 2Uncertainty (K) : 1.5 m/s 2CdNi-MHLi-ion