15CleaningWhen the dust case becomes dirty or the mesh filter isclogged, remove and wash them with water. (Refer to“Disposing of dust” for the removal procedure.)Dry the parts thoroughly before reinstallation and use.(Fig. 40)When the mesh filter gets dirty badly, clean it in thefollowing procedures.1. Turn the mesh filter counterclockwise and remove itwhile the hooks are unlocked. (Fig. 41)2. Remove the dust on the mesh filter and then wash itwith water. After that, dry it thoroughly.3. Insert the mesh filter into the base while the hooks arealigned with the port. Turn the mesh filter clockwiseuntil the hooks are locked with a click. Make sure thatthe mesh filter is installed securely. (Fig. 42)

Makita DCL180 Instruction Manual

DCL180

specifications

important safety

optional accessories

tekniske data

tekniset tiedot

tehnilised andmed

save these instructions

technische daten

Fig.1

Fig.2

Fig.3

Fig.4

Fig.9

Fig.11

Fig.12

Fig.20

INSTRUCTION MANUAL

BRUKSANVISNING

Fig.10

Fig.18

Fig.19

KASUTUSJUHEND

BEDIENUNGSANLEITUNG

safety rules

accesorios opcionales

sponge filter

DCL180F