Makita DF332D Instruction Manual

Also see for DF032D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita DF332D Instruction Manual Manual pdf 6 page image

6 ENGLISHGeneral power tool safety warningsWARNING: Read all safety warnings andall instructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Cordless driver drill safety warnings1. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.2. Hold power tool by insulated gripping sur-faces, when performing an operation wherethe cutting accessory may contact hiddenwiring. Cutting accessory contacting a "live"wire may make exposed metal parts of the powertool "live" and could give the operator an electricshock.3. Hold power tool by insulated gripping sur-faces, when performing an operation wherethe fastener may contact hidden wiring.Fasteners contacting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.4. Always be sure you have a firm footing. Besure no one is below when using the tool inhigh locations.5. Hold the tool firmly.6. Keep hands away from rotating parts.7. Do not leave the tool running. Operate the toolonly when hand-held.8. Do not touch the drill bit or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.9. Some material contains chemicals which maybe toxic. Take caution to prevent dust inhala-tion and skin contact. Follow material suppliersafety data.SAVE THESE INSTRUCTIONS.WARNING: DO NOT let comfort or familiaritywith product (gained from repeated use) replacestrict adherence to safety rules for the subjectproduct. MISUSE or failure to follow the safetyrules stated in this instruction manual may causeserious personal injury.Important safety instructions forbattery cartridge1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product usingbattery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medical atten-tion right away. It may result in loss of youreyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any con-ductive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large currentflow, overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 °C (122 °F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.10. Follow your local regulations relating to dis-posal of battery.SAVE THESE INSTRUCTIONS.CAUTION: Only use genuine Makita batteries.Use of non-genuine Makita batteries, or batteries thathave been altered, may result in the battery burstingcausing fires, personal injury and damage. It willalso void the Makita warranty for the Makita tool andcharger.Tips for maintaining maximumbattery life1. Charge the battery cartridge before completelydischarged. Always stop tool operation andcharge the battery cartridge when you noticeless tool power.2. Never recharge a fully charged battery car-tridge. Overcharging shortens the batteryservice life.3. Charge the battery cartridge with room tem-perature at 10 °C - 40 °C (50 °F - 104 °F). Leta hot battery cartridge cool down beforecharging it.FUNCTIONALDESCRIPTIONCAUTION: Always be sure that the tool isswitched off and the battery cartridge is removedbefore adjusting or checking function on the tool.