Makita DHK180 Instruction Manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DHK180Blows per minute 0 - 3,200 min -1Overall length 368 mmRated voltage D.C. 18 VNet weight 3.3 - 3.6 kg• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridgeBL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B• Some of the battery cartridges listed above may not be available depending on your region of residence.WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may causeinjury and/or fire.Intended useThe tool is intended for chiselling or scraping in con-crete, brick, and stone.NoiseThe typical A-weighted noise level determined accord-ing to EN60745-2-6:Sound pressure level (L pA ) : 83 dB(A)Sound power level (LWA ) : 94 dB (A)Uncertainty (K) : 3 dB(A)NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s) mayalso be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN60745-2-6:Work mode: chisellingVibration emission (ah, Cheq): 4.5 m/s2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission duringactual use of the power tool can differ from thedeclared value(s) depending on the ways in whichthe tool is used especially what kind of workpieceis processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications providedwith this power tool. Failure to follow all instructionslisted below may result in electric shock, fire and/orserious injury.