Makita DHP459 Instruction Manual

Also see for DHP459: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use the acces-sories or attachments for their stated purposes.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Drill bits• Tungsten-carbide tipped hammer bit• Screw bits• Socket bit• Blow-out bulb• Safety goggles• Makita genuine battery and charger• Hook• Bit holderNOTE:• Some items in the list may be included in the tool pack-age as standard accessories. They may differ fromcountry to country.ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA): 82 dB (A)Sound power level (L WA): 93 dB (A)Uncertainty (K): 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: impact drilling into concreteVibration emission (a h, ID ): 8 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: drilling into metalVibration emission (a h, D ): 2.5 m/s2 or lessUncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has been mea-sured in accordance with the standard test method andmay be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect the oper-ator that are based on an estimation of exposure in theactual conditions of use (taking account of all parts ofthe operating cycle such as the times when the tool isswitched off and when it is running idle in addition tothe trigger time).ENH101-18For European countries onlyEC Declaration of ConformityMakita declares that the following Machine(s):Designation of Machine:Cordless Hammer Driver DrillModel No./ Type: DHP459Conforms to the following European Directives:2006/42/ECThey are manufactured in accordance with the followingstandard or standardized documents:EN60745The technical file in accordance with 2006/42/EC is avail-able from:Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium31.12.2013Yasushi FukayaDirectorMakita, Jan-Baptist Vinkstraat 2, 3070, Belgium