Makita DHR182ZU Instruction Manual

Also see for DHR182: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

13 ENGLISHImportant safety instructions forbattery cartridge1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) batterycharger, (2) battery, and (3) product using battery.2. Do not disassemble battery cartridge.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse them outwith clear water and seek medical attention rightaway. It may result in loss of your eyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any con-ductive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.A battery short can cause a large currentflow, overheating, possible burns and even abreakdown.6. Do not store the tool and battery cartridge inlocations where the temperature may reach orexceed 50 °C (122 °F).7. Do not incinerate the battery cartridge even ifit is severely damaged or is completely wornout. The battery cartridge can explode in a fire.8. Be careful not to drop or strike battery.9. Do not use a damaged battery.10. The contained lithium-ion batteries are subject tothe Dangerous Goods Legislation requirements.For commercial transports e.g. by third parties,forwarding agents, special requirement on pack-aging and labeling must be observed.For preparation of the item being shipped, consult-ing an expert for hazardous material is required.Please also observe possibly more detailednational regulations.Tape or mask off open contacts and pack up thebattery in such a manner that it cannot movearound in the packaging.11. When disposing the battery cartridge, removeit from the tool and dispose of it in a safeplace. Follow your local regulations relating todisposal of battery.12. Use the batteries only with the productsspecified by Makita. Installing the batteries tonon-compliant products may result in a fire, exces-sive heat, explosion, or leak of electrolyte.13. If the tool is not used for a long period of time,the battery must be removed from the tool.SAVE THESE INSTRUCTIONS.CAUTION: Only use genuine Makita batteries.Use of non-genuine Makita batteries, or batteries thathave been altered, may result in the battery burstingcausing fires, personal injury and damage. It willalso void the Makita warranty for the Makita tool andcharger.Tips for maintaining maximumbattery life1. Charge the battery cartridge before completelydischarged. Always stop tool operation andcharge the battery cartridge when you noticeless tool power.2. Never recharge a fully charged battery cartridge.Overcharging shortens the battery service life.3. Charge the battery cartridge with room tempera-ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hotbattery cartridge cool down before charging it.4. Charge the battery cartridge if you do not useit for a long period (more than six months).Important safety instructions forwireless unit1. Do not disassemble or tamper with the wireless unit.2. Keep the wireless unit away from young chil-dren. If accidentally swallowed, seek medicalattention immediately.3. Use the wireless unit only with Makita tools.4. Do not expose the wireless unit to rain or wetconditions.5. Do not use the wireless unit in places wherethe temperature exceeds 50°C (122°F).6. Do not operate the wireless unit in placeswhere medical instruments, such as heartpace makers are nearby.7. Do not operate the wireless unit in places whereautomated devices are nearby. If operated, auto-mated devices may develop malfunction or error.8. Do not operate the wireless unit in places underhigh temperature or places where static electric-ity or electrical noise could be generated.9. The wireless unit can produce electromagneticfields (EMF) but they are not harmful to the user.10. The wireless unit is an accurate instrument. Becareful not to drop or strike the wireless unit.11. Avoid touching the terminal of the wirelessunit with bare hands or metallic materials.12. Always remove the battery on the productwhen installing the wireless unit into it.13. When opening the lid of the slot, avoid theplace where dust and water may come into theslot. Always keep the inlet of the slot clean.14. Always insert the wireless unit in the correct direction.15. Do not press the wireless activation buttonon the wireless unit too hard and/or press thebutton with an object with a sharp edge.16. Always close the lid of the slot when operating.17. Do not remove the wireless unit from the slot whilethe power is being supplied to the tool. Doing somay cause a malfunction of the wireless unit.18. Do not remove the sticker on the wireless unit.19. Do not put any sticker on the wireless unit.20. Do not leave the wireless unit in a place wherestatic electricity or electrical noise could begenerated.21. Do not leave the wireless unit in a place sub-ject to high heat, such as a car sitting in thesun.